Hebei Xiangte Seal Technology Co., Ltd.
Quality-oriented, customer first
Add to Cart
Automobile FKM Oil Seal High Pressure Rotary Oil Seal Air Compressor Seals
Information
Our oil seals are made of the highest quality raw materials, which lays a solid foundation for their excellent quality. The rubber part of the oil seal is made of imported high-performance fluorine rubber, which has excellent resistance to high and low temperatures, and can maintain stable physical properties and sealing performance in the extreme temperature range of -40℃ to +250℃. Whether in the cold polar environment or hot desert area, it can work normally and will not affect the sealing effect due to temperature changes.
Fluorine rubber also has excellent chemical resistance, can resist a variety of strong acids, alkalis, organic solvents and other chemicals, suitable for handling a variety of corrosive media equipment. At the same time, the abrasion resistance of fluoroelastomer is also very good, can withstand prolonged friction and wear, prolonging the service life of the oil seal.
Features of Oil Seal Materials
| MATERIAL | FEATURES | Temperature |
| Nitrile Rubbr (NBR) | Excellent wear resistance Excellent aging resistance Excellent Oil resistance Good water resistance Fair ozone resistance Fair acid resistance | -40~120°C |
| Fluorinated Rubber (FKM) | Excellent wear resistance Excellent aging resistance Excellent Oil resistance Good water resistance Excellent ozone resistance Excellent acid resistance | -26~250°C |
| Silicone Rubber | Poor wear resistance Excellent aging resistance Poor Oil resistance Good water resistance Excellent ozone resistance Fair acid resistance | -60~225°C |
Other Type
| Type | Features |
| TC | The outer part is rubberized design, double lip with spring |
| SC | The outer part is rubberized design, double lip with spring |
| TB | The outer layer is an iron shell, double lip with spring |
| SB | The outer layer is an iron shell, single lip with spring |
| TA | The design of the inner shell combination is used to strengthen the steel of the oil seal,double lip with spring |
| EC | It is mainly used for the orifice core of the oil seal and the bearing, mainly for the gear box and other parts |
| SA | The design of the inner shell combination is used to strengthen the steel of the oil seal,double lip with spring |
| DKB | The outer iron shell is fluted and has a dual lip dust seal. |
| TCN | The exterior is iron on one side and rubber on the other, with springs on both lips |
| TCV | Outer layer is rubber, inner skeleton, double lip with spring |
| VG | Surface threaded, single lip without spring |
| VB | Outside is iron shell, inside is rubber, single lip without spring |
| VC | The outer part is rubberized, single lip without spring |
| RB | It is a seal for rotating shafts of elastomers protected by a metal bracket, mainly acting as a barrier to the intrusion of external contaminants. |
| 9RB | It is a seal for rotating shafts of elastomers protected by a metal bracket, mainly acting as a barrier to the intrusion of external contaminants. |
| DC | Outer rubber inner skeleton with springs on both sides. |
| DB | The lip of the outer skeleton is rubber, with springs on both side. |
| TC4 | Outer rubber, inner skeleton, spring in both lips |
| TG4 | Outer rubber, inner skeleton, spring in both lips, threaded surface. |
| TB4 | Outer shell iron, inner rubber, spring in both lips. |
Details Images
Product Packaging
Company Introduction